Dodge Promaster Van Baltic Birch Upper Cubby

No need to pay a professional van builder to have professionally installed cubby in your van build.

The Veritas Vans Promaster Cubbies are designed for the DIY van builder by providing van cubby that is affordable, versatile, with professional quality. Any van DIYer can install our cubbies with great success. These cubbies will save you time and require far fewer tools than if you were to build cubbies from scratch. Using 3D models and computer-aided design we have matched the curvature of each van model interior. Designed to fit on either the passenger or driver side in any position from front to back in your van. Under the false bottom of our cubbies are electrical wiring paths to allow you to hide electrical wiring for lights, chargers, or switches. Pilot holes are pre-drilled for lights. Made of the best Baltic Birch Plywood available, they are strong, durable, and have a real wood finish. They are ready for personal touches with your choice of stain or paint to match your van style.

[3d_viewer id=”1284″]

Promaster Van Upper Cubby Kit Includes:
• 11 Packed flat cubbies panels made of ½ inch and ¾ inch Baltic Birch Plywood

Promaster Cubbies Features:
• 3D Modeled; CNC cut panels for excellent fitment into the Promaster
• Electrical wiring channels are cut into the subfloor allowing for wiring to pass through the cabinet
• A false bottom cabinet floor is included to hide all wiring for lights, switches, or chargers
• Three partially drilled holes in the subfloor allow for optional under cabinet puck lighting to easily be installed
• Mounting cross plates are located at the top front and bottom rear of the cabinet to allow for unlimited mounting options
• Wire relief in the rear mounting plate allows for wiring to be changed after the cabinet is installed
• Only basic tools are required for assembly and installation

Promaster Cubbies Dimensions:
• Length: 24″ Single Opening, 35″ Single Opening, 47.5″ Double Opening, 56″ Double Opening

Size:
• 10″x10″ : 10″ deep by 10″ tall
• 10″x14″ : 10″ deep by 14.75″ tall
• 12″x12″ : 11.5″ deep by 11.5″ tall
• 14″x14″ : 14.25″ deep by 14.75″ tall

• Weight: 35″ = 21.5 lbs, 47.5″ = 30 lbs, 56″ = 34 lbs

**Actual length of the 48″ cubby is 47.5″
** Actual depth and height of the 12″ Cubby is 11.5″

Tools required for assembly:
• Wood glue
• Wood clamps and/or nail gun with finishing nails
• Mallet
• Power drill with Phillips head bit and drill bit for handle holes
• Phillips screwdriver

Promaster Upper Cubbies Assembly:
Assembly is easier than IKEA Cubbies. Clear instructions are included to guide you through the assembly. Basic assembly instructions are to apply glue, tap panels together with a mallet and clamp them together until dry.

Promaster Van Upper Cubbies Installation:
Each van build is unique, and how people choose to install our products will vary widely. For that reason, we do not supply any hardware for installation or offer mounting instructions. However, installing these van cubbies is easy. If you are using wall paneling, make sure to mark your van’s structural ribs or preinstalled mounting studs to ensure your cubby hardware hits these structural elements. We suggest using jack nuts/rivet nuts and bolts or heavy-duty sheet metal screws to mount your cubbies. You should align your cubbies, mark where the structural elements of the van are, and pre-drill holes through the mounting plates for final installation.

Shipping:
The cubby is flat-packed and shipped to you with all hardware included, excluding handles and mounting hardware.

Recommend Lights: