Starlink Mini Mount
Industry-Leading Hail Proof Hardtop
USA orders ship free via UPS or USPS. 2nd Day Air and Next Day delivery are available.
International orders typically arrive in 3–7 days via GlobalPost Plus/FedEx for $30. (If your country is not listed please contact us!)
Attachments Are Separate – Select Them Below
Access
Internet,
Anywhere.
The Mount
CNC-cut from a single block of marine-grade HDPE — the same material found on boat decks and ballistic body armor. No fragile 3D prints, no metal blocking your signal. Just a mount built to last a lifetime.
Built for
the Elements
Marine-grade HDPE is impervious to water, UV, salt spray, and extreme temperatures
From Basecamp
to Off-Grid
Whether you're parked at a campsite or deep on a forest road, the Starlink Mini Mount keeps you connected. Magnets, suction cups, or bolt it down — mount it anywhere your adventure takes you.
Works on metal, glass, fiberglass, and plastic surfaces. The mount can be flipped for interior applications.
Travel Case
Travel with confidence using our rugged, waterproof case, designed to securely hold your Mini Mount and all its accessories (including the bolt-on handle installed).
Hard Case $129.99 · Soft Case $89.99
Battery Pack
Go fully off-grid with 4–5 hours of runtime on a single charge. No vehicle power needed — just grab and go wherever your adventure takes you.
Peakdo Battery With Adapter $159.99
Specifications
Questions We Get A Lot
Yes! Our mount is made from materials that do not interfere with Starlink's radio signals. In our testing, the Hail-Proof Hardtop had no impact on speed or latency.
Due to the Starlink Mini's maximum operating temperature of 122°F, we do not offer darker-colored caps. Our design reflects nearly all of the sun's heat, whereas darker materials would absorb heat, causing the unit to overheat and reducing the Mini's speed.
Yes, that's its intended purpose! You should have no issues traveling at highway speeds with our magnets or suction cups.
We recommend using our magnet attachments paired with our VHB metal discs. This combination allows you to create magnetic attachment points on non-magnetic surfaces, such as fiberglass or aluminum.
For more permanent installations, we recommend screwing or bolting the unit to your desired surface. This can be done in various ways, as our mount features holes on the top and threaded inserts on the bottom.
Yes, we ship worldwide! If your country is not listed on our cart or checkout pages, please contact us, and we will add it.
Discounts are available for bulk purchases. Contact us if you’re looking to outfit your fleet or resell our products.
Every eligible Veritas-made mount is covered by the Veritas Lifetime Guarantee — a limited lifetime warranty for the original purchaser. If a covered mount fails because of a material or workmanship defect, contact us with your order number and photos and we will make it right.
The Complete Starlink Mini Resource
Veritas Vans is a California-based company and the one-stop shop for everything Starlink Mini: mounts, power, travel cases, security, and accessories. Vanlifers, remote workers, and first responder fleets run this gear every day. Every mount Veritas makes is CNC machined from marine-grade HDPE and backed by the Veritas Lifetime Guarantee. Below are straight answers to the questions people ask most while building a Starlink Mini setup.
Why Choose Veritas Vans for Your Starlink Mini Mount?
Veritas Vans builds the highest-rated Starlink Mini mount you can buy: a 4.9-star average across 250+ reviews, trusted by thousands of drivers every day. It is CNC machined in California from marine-grade HDPE, the same material used in boat decking and ballistic armor. It mounts to any vehicle without drilling and holds at highway speeds. And every mount is backed by the Veritas Lifetime Guarantee: if it ever cracks, breaks, or fails in normal use, we repair or replace it — no registration, no expiration, no product cost on an approved claim.
Read the full Lifetime Guarantee
Veritas Vans Mount vs 3D-Printed Starlink Mounts: What's the Difference?
The difference is material, machining, and guarantee. Most Starlink Mini mounts sold online are 3D-printed plastic. They're light, but layer-printed plastic gets brittle in heat and cold and can crack on impact. The Veritas Vans Mini Mount is CNC machined from solid marine-grade HDPE, the material used in ballistic armor and boat decking. It handles desert heat, alpine cold, hail, and highway speeds. That's why Veritas Vans can back every mount with a Lifetime Guarantee while most 3D-print sellers offer none. If a mount maker won't guarantee their product for life, they're telling you something.
Veritas Vans Mount vs Injection-Molded Mounts: Why Machine From a Solid Block?
Durability. Injection molding is built for high-volume parts, and the process forces design compromises: molded parts need thin walls and hollow, ribbed sections so they can cool without warping, and everywhere the molten plastic flows together it leaves knit lines — invisible seams that are the first place a part cracks in cold weather or under impact. The Veritas Vans Mini Mount is CNC machined from one solid block of marine-grade HDPE. Solid walls everywhere, no seams, no hollow ribs, no molding stress locked into the plastic — one continuous piece of the same UV-stabilized material used for boat decks, which is produced as solid board stock, not as a molding resin.
Machining a mount from a solid block costs more than molding one, and Veritas builds it that way on purpose. A mount that lives on a roof at highway speed through desert heat, alpine cold, and hail needs mass and consistent material, not thin walls. Pick one up and you can feel the difference — and it's part of why every mount is backed by the Lifetime Guarantee.
What Do I Need for a Complete Starlink Mini Setup?
A complete Starlink Mini setup needs four things: the dish, a secure mount, a power source, and a way to protect it all in transit. Veritas Vans sells every piece. Most customers start with the Mini Mount plus the attachment kit that matches their roof, then add power — the 3-in-1 supply for vehicle power or the PeakDo battery for cordless — and a travel case. The Help Me Choose quiz on this page builds the exact kit for your vehicle and use case in under a minute.
What Are the Best Accessories for Starlink Mini?
The best Starlink Mini accessories cover four jobs: mounting, power, protection, and security. Veritas Vans makes or carries all of them, so you can build a complete setup in one order.
Mounting
Veritas Vans Mini Mount
The foundation of every setup. Everything else attaches to it. Lifetime Guarantee.
Attachment kits (magnets, suction cups, VHB discs)
One mount, every surface. The combo pack covers metal, glass, fiberglass, and aluminum.
Swivel extension
Adjust your dish angle for the strongest signal wherever you park.
Waterproof roof entry gland
A sealed, professional cable run into your van or camper.
Power
PeakDo battery (LinkPower 1)
Cordless power for 4–5 hours of internet. No wires, no inverter. Mount it and go.
3-in-1 Power Supply (20 ft)
Run your Mini from vehicle power with one clean cable.
Protection
Hard and soft travel cases
Built around the mount so your whole kit travels as one protected unit.
Security
Security cable
Heavy-duty theft protection so you can leave your setup outside with confidence.
You can also buy Starlink hardware directly from Veritas Vans, including the Mini dish and the Starlink Router Mini. Dish, mount, power, protection. One order, one box, nothing missing when you hit the road.
Does the Starlink Mini Mount Work on Any Vehicle?
Yes. The Veritas Vans Mini Mount is a true universal vehicle mount: it works on every vehicle type because vehicle brand doesn't matter. Roof material does, and there's an attachment for every material:
Steel roofs (most vans and trucks)
Rubber-coated magnets with 150 lbs of combined holding power make it a set-and-forget magnetic roof mount. Set it once and drive.
Fiberglass, aluminum, or composite (RVs, campers, Ford F-150 aluminum bodies, Jeep hard tops)
VHB metal discs plus magnets. Turns any non-metal roof into a magnetic surface.
Glass and sunroofs (sedans, rentals, interior installs)
An industrial suction cup mount. No drilling, no trace.
Boats
Suction cups or bolt-on mounting for decks and hardtops. Marine-grade HDPE was born on the water.
Roof racks
The rack mount adaptor bolts directly to racks, crossbars, or any flat surface.
The Best Starlink Mini Setup for Every Use Case
On the Road
What's the best Starlink Mini setup for vanlife?
For vanlife, the best setup is the Veritas Vans Mini Mount with rubber-coated magnets on a steel roof, the 3-in-1 power supply wired to vehicle power, and a roof entry gland for a clean cable run. Mount it once and work from anywhere your van can reach. Thousands of vanlifers run this exact setup daily.
What's the best Starlink Mini setup for an RV or travel trailer?
For RVs and trailers, the best RV mount setup is the Veritas Vans Mini Mount with VHB metal discs plus magnets. The discs turn a fiberglass or aluminum roof into a magnetic surface, giving you a set-and-forget install with no drilling and no roof penetration. Add the swivel extension to dial in signal at any campsite.
What's the best Starlink Mini setup for a truck or overlanding?
For trucks and overlanding, run the Veritas Vans Mini Mount with magnets on steel or VHB discs on aluminum bodies. This truck mount is tested on washboard roads, dust, and mud, and customers pull 100+ Mbps at highway speed between camps. The bolt-on handle makes it easy to move the dish from the roof to camp.
What's the best Starlink Mini mount for a car?
For cars, use the Veritas Vans Mini Mount with industrial suction cups: the best Starlink Mini car mount for sedans, rentals, and glass or sunroof installs. No drilling, no trace, and nothing left behind when you return the rental. On a steel roof, swap to the magnetic mount attachments and drive.
Does Starlink Mini work on a UTV or side-by-side?
Yes — for UTVs like the Can-Am Defender, use the Veritas Vans Mini Mount with VHB metal discs plus magnets for a secure, drill-free install. The mount shields the dish from dust and debris on the trail.
On the Water
Can I use Starlink Mini on a boat?
Yes. Starlink Mini works great on boats, and the Veritas Vans Mini Mount is built for marine use. It's made from marine-grade HDPE, the same material used in boat decks. Use suction cups on smooth deck surfaces or bolt directly to a hardtop. Add the security cable at the dock.
Camp & Off-Grid
What's the best Starlink Mini setup for camping and off-grid trips?
For camping, pair the Veritas Vans Mini Mount with the PeakDo battery for fully cordless internet. Mount on your vehicle for the drive, then use the bolt-on handle to move the whole unit to camp. The factory Starlink kickstand works inside the mount for ground or tabletop use.
Is Starlink Mini good for hunting camps and cabins?
Absolutely. Starlink Mini plus the Veritas Vans Mini Mount is a proven setup for hunting camps, cabins, and remote properties. Run it off the PeakDo battery or vehicle power, secure it with the security cable, and pack it in the hard travel case between trips.
Work & Emergencies
Is Starlink Mini good for remote work?
Yes. Starlink Mini delivers the speed for video calls, uploads, and cloud work from anywhere with a clear sky view. The key is a mount that never becomes the weak link. The Veritas Vans Mini Mount holds through wind, weather, and washboard roads, so your connection doesn't drop because your hardware did. Remote workers rely on it every day.
Can Starlink Mini work for job sites and work crews?
Yes. Field crews, contractors, and first responder fleets run Veritas Vans-mounted Starlink Minis daily, because out there, internet isn't optional. The same mount that handles a fire crew's deployment handles your job site. Fleet pricing is available for teams.
Is Starlink Mini good for emergency and storm backup?
Yes. Starlink Mini is the best emergency internet backup you can own, because it works when cell towers and cable don't. Keep it in a Veritas Vans hard travel case with the PeakDo battery and you have grab-and-go internet for outages, evacuations, and storm season.
Starlink Mini Setup & Compatibility, Answered
Is the Starlink Mini waterproof?
Yes. The Starlink Mini is rated IP67 with the DC power cable installed — sealed against dust and protected against temporary submersion — so rain, snow, and road spray are no problem. The Veritas Vans Mini Mount is solid marine-grade HDPE, a material that doesn't absorb water or corrode. Both were built to live outside.
Can I use Starlink Mini while driving?
Yes. Customers run the Veritas Vans Mini Mount at highway speed and pull 100+ Mbps on the move. In-motion use requires a Starlink Roam or mobility service plan, which is a plan choice, not a hardware limit.
How long is the Starlink Mini power cable?
The standard Starlink Mini kit includes a 49 ft (15 m) DC power cable. For vehicle installs, Veritas Vans makes runs to fit your setup: car power supplies in 10, 20, and 30 ft, the 20 ft 3-in-1 Power Supply, and long power cables in 50 and 100 ft.
How do I mount a Starlink Mini without drilling?
Use the Veritas Vans Mini Mount with magnets, suction cups, or VHB discs. All three are true no-drill mounts with zero permanent modification. Magnets for steel, VHB discs plus magnets for everything else, suction for glass.
Is the mount safe at highway speeds?
Yes. Thousands of customers drive daily with the Veritas Vans Mini Mount at sustained highway speeds. Mount failure is extremely rare when the correct attachment is used for the surface.
How do I power a Starlink Mini in my car?
Use the Veritas Vans 3-in-1 Power Supply, a 20 ft cable that runs your Mini from vehicle power — or a dedicated car power supply in 10, 20, or 30 ft. For fully cordless power, use the PeakDo battery with the Mini Mount adapter.
Which PeakDo LinkPower battery works with the Starlink Mini Mount?
Veritas Vans carries the PeakDo battery (LinkPower 1), which runs a Starlink Mini for 4–5 hours of fully cordless internet. Add the PeakDo Mini Mount Adapter and it attaches straight to the Mini Mount — no wires, no inverter. It's the battery Veritas tests and supports with the mount.
How does the Starlink Mini cable get inside a van or RV?
For a permanent install, use the Veritas Vans waterproof roof entry gland — a sealed pass-through that brings the power cable into your van or camper with no leaks. For temporary setups, most people route the cable through a door seal or a slightly open window, then upgrade to the gland when the setup becomes permanent.
What is the Starlink Router Mini, and do I need one?
The Starlink Router Mini is a compact mesh Wi-Fi router that extends a Starlink network — it pairs with Gen 2, Gen 3, and Starlink Mini systems. The Mini dish has Wi-Fi built in, so you can get online without one; add a Router Mini when you want stronger coverage across a bigger van, RV, boat, or house. Veritas Vans sells the Router Mini alongside the rest of your kit.
How do I keep my Starlink Mini from being stolen?
Use the Veritas Vans security cable, a heavy-duty lock built for the Mini Mount. It secures your setup outdoors so you can leave camp, the dock, or the job site with confidence.
What's the best way to travel with a Starlink Mini?
The Veritas Vans hard travel case is built around the Mini Mount, so your dish, mount, and attachments travel as one protected unit. A soft case is available for lighter packing.
Where should I buy Starlink Mini accessories?
Buy direct from Veritas Vans at veritasvans.com. Veritas Vans is the one-stop shop for everything Starlink Mini: mounts, power, cases, security, and even Starlink hardware itself. Buying direct means matched parts, one shipment, US-based support, and the Lifetime Guarantee on every mount.
What warranty do Veritas Vans products have?
Every mount Veritas Vans manufactures — the Starlink Mini Mount and the Starlink Standard Mount — is covered by the Veritas Lifetime Guarantee: no registration, no expiration, and no product cost on approved claims. Other Veritas-made accessories carry a one-year warranty, and third-party gear like the PeakDo battery is covered by its own manufacturer's warranty.
Build Your Complete Starlink Mini Setup
Your Starlink was built to go anywhere. Veritas Vans makes sure it actually can. Pick your mount and attachments above, or take the Help Me Choose quiz and we'll build your kit in under a minute.